News

1101yihongjupianzhanshi

The origin of saw blades can be traced back to ancient times. When early humans needed to cut wood, bones and other materials, they used stones to grind stone flakes with cutting edges for cutting ...

Performance And Application Of High Speed Diamond Saw Blade Coating

The A-series coating adopts a PVD coating that is easy to smooth the saw blade and a very unique heat treatment process, greatly extending the service life of the saw blade.

How To Prevent Unnecessary Wear Of Diamond Saw Blades

Diamond saw blades are widely used as efficient cutting tools for stone processing. However, the research on the sawing mechanism of diamond saw blades in stone processing is not yet in-depth, and ...

Discussion On The Selection Principles Of Milling Cutters

The selection of milling cutter diameter varies greatly depending on different products and production batches. The selection of tool diameter mainly depends on the specifications of the equipment ...

How To Distinguish Between Good And Bad Diamond Saw Blades?

At present, the steel used for the matrix of diamond saw blades is mainly medium to high carbon spring steel. Non metallic inclusions, uneven microstructure

How Should Milling Cutters Be Classified By Function?

A cylindrical milling cutter is used to process flat surfaces on a horizontal milling machine, with cutter teeth distributed around the circumference of the milling cutter.

Learn The Geometric Angles Of Milling Cutters

Although there are many types and shapes of milling cutters, they can be summarized into two basic forms: cylindrical milling cutters and face milling cutters.

When Milling Cutter Grinding, Which Links Are Prone To Errors?

In the process of milling cutter grinding, due to many factors affecting the accuracy, the error is difficult to avoid. The following will be from five aspects of materials, equipment, operation, e...

Do You Know All Four Commonly Used Milling Cutters in Processing?

The milling cutter is a multi tooth rotary milling cutter, each tooth being equivalent to a turning tool fixed on the rotating surface of the milling cutter.